The liberated house (Apr, 1980)

The liberated house

— no hookups — it rolls anywhere and lives off the sun and earth An ingenious structure integrates many energy-conserving technologies

By EVERETT H. ORTNER

PHOTOS BY THE AUTHOR AND KRISTEN PETERSON Was this the American home of the future—this cross between a submarine and a World War II Quonset hut, this metal half-sausage afloat on a sea of mud?

Probably not. My hosts, its designer-builders, Ted Bakewell III and Michael E. Jantzen, had other objectives in mind for their Autonomous Dwelling Vehicle—even though it may well unite more house-of-the-future conservation concepts, technologies, and materials that have ever been brought together in one structure. Their goal was to build a trailerable structure that would:

• First, be a mobile home, light and small enough to be towed long distances over the road, or be carried by helicopter, or even be floated on water.

• Second, be independent of utility hookups—electricity, gas, water, and sewage—and of fossil fuels.

• Third, be mass-producible at a cost competitive with luxury travelers of comparable size.

It would be just the thing that Ted Bakewell, 33, an executive with Bake-well Corp., a giant St. Louis real-estate development company, would like to park outside one of his new developments without concern for water or sewers—and in places where such hookups might not even be available.

It’s the kind of thing that Michael E. Jantzen, 31, a conservationist and designer, specializes in: “alternatives to alternatives.” Jantzen’s own house, 64 miles away in Carlyle, 111., is an expression of his absorption in the problems of conserving fossil fuels through the use of solar and wind energy (it appeared in the “What’s New” section of POPULAR SCIENCE in June 1979); and the Autonomous Dwelling Vehicle was born in an apple orchard next to his house. Actually, says Bakewell, “Michael’s house is the mother ship of the Autonomous Dwelling Vehicle.”

Silo shell “Let’s look at the external features first,” says Bakewell, leading the way through the large muddy field in the center of a Bakewell office park. “The shell, for example.” The interlocking, aluminized-steel sections that form the rounded ends of the vehicle are normally used for silo tops. The center section would normally be used to join twin silos. “They’re very thin sheets, fabricated with a ridge in each panel, so they easily slide together, interlocking, for a totally watertight seal,” Bakewell says.

The silos are made by Intercontinental Domes, in Plainfield, 111. “The people from Intercontinental came out here, and they were quite surprised to see what had happened to their domes,” says Bakewell. “Since then, they’ve hired Jantzen to see what other things we could do with them.”

Gutters on both sides of the vehicle capture rainwater. A tube carries the water to a tank, a flexible vinyl bladder that sits on the ground under the frame. Freezing doesn’t bother the bladder; it expands or compresses without damage, and it can be emptied and stowed for travel. “In a 15-minute rain, we can capture as much as 55 gallons,” Jantzen says. Bake-well adds: “But we can’t depend on the rain for all our needs. So we have a water-recycling and purification capability on board. Even the rainwater is filtered before it’s used, to remove the dirt washed off the building as well as some of the pollutants in the air.”

Little clusters of black half-cylinders stand on the decks fore and aft of the domes. They’re light and strong, and eventually they will be hinged, to open and provide an outside storage capacity. “These containers are normally used for sump pumps,” Jantzen says, “you know, sump-pump liners.”

Two bubble skylights, set in the centers of the silo domes, admit light and (in summer) air to the vehicle. They serve, too, by means of shelves that support trays, as food dehydrators. “They also help to ventilate the vehicle by a thermo-chimmey effect,” Jantzen says, “pulling the lower air out by heating the bubble.”

Turbine ventilators—three in summer, two the rest of the year—also pull out hot air. The turbines are large for the space, to assure maximum ventilation. There are vents in the ends of the structure, making for “tremendous cross-ventilation,” says Bake-well, even with the doors closed for security. The third ventilator is replaced by a stovepipe in winter. “Also, that being the highest point on the structure in the winter,” Bakewell says, “it is fitted with a branch of the lightning-rod cable, so the chimney becomes a third lightning rod at this time of year.” The cable runs to a stout copper rod planted 10 feet in the ground.

Decks, made of aluminum grating, on the two sides of the structure tilt up for travel. “For the highway, we have to trim our width down to 14 feet, and in most states there’s a height limitation of 13 feet,” Bakewell says. “Before we travel, we unscrew the lightning rods and pull the turbines off and the two top sections of those other chimneys [for the toilet and incinerator]. It trims down to 12 feet, eight inches. In transporting the vehicle from Illinois, we had to go under the lowest bridge in Missouri—13 feet, two inches—and it made it.”

Solar features Next to the entry deck is a solar photovoltaic array, with a reflector below it. With the sun shining, it has a peak output of 80 watts, going to 120 at noon when the reflector comes into use. Four 12-volt marine batteries store the electricity. “It works because we have designed our electrical needs with the most energy-efficient appliances available,” Bakewell says. “We have a truly microload demand that is matched to this small solar panel.”

The sides of the vehicle are painted black and are covered with corrugated, translucent fiberglass. There is an air space between the metal and the fiberglass. Small, super-efficient blowers (designed to cool electronic equipment in the nose cones of jet aircraft) pull air through the space and into ducts inside that carry the heated air into storage compartments.

Above that is another corrugated-fiberglass area. That’s the solar water heater. Beneath the fiberglass are copper pipes through which is pumped a synthetic oil —a heat-exchange material. The copper coils wrap around the water tank below and give up their heat. Jantzen says: “On a sunny day, you can’t touch the water—it’s so hot.”

Now we’re coming into the entry-way—an area, covered by a transparent roof, that is designed to be a greenhouse for small hydroponic plantings, an occasional cooking area (there is a solar cooker), a sun porch when a hammock is stretched across it, and a mudroom. Floors and walls are cov- ered with a material called TileDek, designed for swimming-pool decks. On the floor, mud drops through to the subfloor. On the walls, the material serves as a handsome and useful perfboard. The material is also fireproof. Where had they come across it?

Says Jantzen, “It was in your ‘What’s New’ section not too long ago” [WN Home Improvement, Aug. '79], Then they read POPULAR Science?

“I subscribe,” Jantzen says.

“Best magazine going,” Bakewell adds.

Heat storage Inside, two large, shiny, insulated ducts traverse the ceiling, carrying heated air to huge storage chambers under the bed and the dining table. Bakewell raises the cover over the bed compartment to show the tubes— Thermol 81 heat-storage cylinders-piled up in there [PS, March], “On paper,” he says, “calculations show that the material should store enough heat to keep the building at 68 degrees F for 48 hours when it’s zero outside—or about five days at 30 degrees outside.”

The table and bed are lined with superinsulating isocyanurate boards, a material called Thermax. One board has an R-value of eight. A double thickness with air space gives the heat-storage chamber an R-value of 16. Little doors at the bases open to release heat.

Inside, the structure has been sprayed with two layers of material: a polyurethane foam, 3-1/2-four inches thick, primarily for insulation, followed by a flameproofing and sound-deadening layer of Durafiber, a test material with a half-hour fire rating in addition to some insulating value.

The weight problem, as with everything in a mobile vehicle, has been carefully considered. All the polyurethane foam weighs only 200 pounds. (The metal shell for the whole structure weighs only 556 pounds.) The fluorescent lights over Bakewell’s drawing board were developed for the space program. Their secret: a high-frequency ballast used with a standard fluorescent tube. They have low and high settings.

“At night, on high beam, using only 20 watts, they give at least the equivalent in light of a 100-watt bulb,” Bakewell says. “And the low beam, 12 watts, is the equivalent of a 60-watt bulb.”

Built-in counters line both ends of the structure, where the curving walls would make it impossible for a person to stand up. At the dining end, they are used for food service. At the bed end, they cover clothes-storage compartments.

“These are 14-foot domes set on 18-inch parapet walls,” Jantzen says. “With the curved outer portion used for storage, you can stand in any part of the Autonomous Vehicle.”

Furnishings for living areas Soft foam-plastic cubes serve for seating in the sitting area—not very comfortable, I thought. An Insulating Shade—the same kind featured in Popular Science in January 1979— covers the large patio doors. Jantzen and Bakewell have had trouble rolling the shade up, but now the manufacturer has a chain mechanism that helps, and they think the problem is solved. For the coldest months, there will also be a one-inch-thick panel to increase the barrier to the cold.

A wood stove, like a black soccer ball over an orange tube, creates a not-unattractive sculpture in the sitting area. Jantzen created the design for his own house.

The last artifact in the sitting area is an ingeniously designed coffee table, made, apparently, from a half panel of plywood. There is a moment of silence when the visitor comments that Jantzen should have submitted the table to the PS plywood-design contest.

“I did,” says Jantzen.

“We all thought Mike should have won that one,” Bakewell adds.

In the dining area, inventive design abounds. Leaves drop down or snap up to extend the table. Seats drop down to get out of the way. Most of Bakewell’s cooking is done on an alcohol stove; he believes in using renewable fuels as much as possible. The refrigerator was designed from scratch. In winter, ducts below bring in cold air, saving electricity. A butterfly valve controls the amount. In summer, a solid-state thermionic device supplies cooling.

The toilet area contains a shower and a Clivus Multrum Bio-Loo, a Swedish waterless toilet that composts human waste odorlessly. The shower resembles a nylon telephone booth. Square hoops support an ingenious curtain arrangement (see photo) sewn together by Jantzen’s wife, Ellen. Bakewell economizes on water by using a special nozzle head, developed for distributing chemicals from crop-dusting planes. It is capable of producing a very fine water-conserving mist that is, he says, nonetheless very effective in washing. Or, if he feels like splurging, he can open it up all the way. Bakewell showers with, basically, recycled water from a gray-water (used wash water) tank, to which he adds, as needed, fresh water taken from the vinyl rainwater bladder.

“We pump gray water into a pressure tank,” he says. “Then it’s forced through a five-micron filter, then a 0.25-micron filter, then an iodinator. Then it goes into a storage tank. Before it’s delivered to a faucet or shower, it goes through a carbon polisher-activated charcoal. We take out the bacteria with the filters, and then we kill the viruses with the iodine.”

The gray-water tank, under the kitchen floor, is just above the rainwater tank, which rests on the ground. A pump takes water from the rainwater tank through filters to the gray-water tank.

Next to the toilet area is the opening to the incinerator. Here waste wood and paper are stored. The hot-water tank is built around the incinerator. When sun heat fails, Bakewell burns his waste material and heats his water that way.

What did all this cost? Bakewell es- timates $16,500. The cost doesn’t include their own time, but it does include all their mistakes. “One thing is important to note,” Bakewell says. “This has been a completely private endeavor—no grants, no subsidies— and as such we’ve been motivated to be a lot more clever with some of our materials and cost savings than if we’d had a huge subsidy to put the whole thing together. We have integrated in one system the state of the art in all the little systems that usually come as individual components.

But here they have been brought together in a workable system that can function in a remote area.”

A Japanese architect who visited the Autonomous Dwelling Vehicle saw it as a good mass-production possibility. With floating collars around the units, he thought, they could be grouped to form residential marina colonies in countries with poorly developed utility infrastructures.

But that’s in the future. Right now it’s probably the most energy-efficient house in the country.

5 comments
  1. Hirudinea says: August 3, 20117:22 am

    Thats one cool Hick Hut, I’ed buy one! Whatever happened with this anyway? And would this be viable as an emergency shelter.

  2. michael jantzen says: August 3, 201110:48 am

    Thanks for the press, it’s been a long time since I did this. So funny to see how it’s all come back again. I haven’t stopped working even without any support of any kind from anyone! Lots more on my web site. http://www.michaeljantz…

  3. Andrew L. Ayers says: August 3, 201112:27 pm

    @michael jantzen: How does it feel to see such an article ressurected after all these years! What ever happened to it? Perhaps I should browse your site first before asking… I never saw the original article (I didn’t get a subscription to popsci until 1984 or so, when I was 10), but from what I see here it reminds me of something similar someone did not too long back with an ISO shipping container (they made the sides drop down to form porches, and one end folded or something to make a screened sleeping area or such)…

  4. Hirudinea says: August 3, 20112:51 pm

    @ michael jantzen – Michael, I’ve just been looking over your website, man you’ve got some wild mind there, really cool stuff! Do you have any info on building some of your projects for people who might be intertested?

  5. Toronto says: August 3, 20113:38 pm

    Michael’s work remnds me somewhat of Bill Lishman, a Canadian inventor/designer/artist, perhaps most famous for the film “Fly Away Home”. His farmhouse has some remarkable ideas incorporated into it.

Submit comment

You must be logged in to post a comment.